Foil Cartridge System for Bubble-free Adhesive Dispensing DELO FLEXCAP

The new cartridge system: DELO FLEXCAP 10 ml and 30 ml with pressure tank DELO FLEXCAP: Reliable, bubble-free adhesive dispensing The unique cartridge system allows bubble-free dispensing of adhesives with viscosities ranging from low to high. Adhesives from the DELO KATIOBOND, DELO PHOTOBOND, DELO DUALBOND and DELO MONOPOX product families are particularly good to dispense. A flexible, hermetically tight foil replaces the conventional cartridge piston. This prevents air from penetrating the adhesive volume past the piston during storage, transport and dispensing. The foil cartridge with bubblefree...

Volume change upon temperature fluctuations The adhesive can contract under the influence of cold during storage. Adhesive cartridge DELO FLEXCAP The flexible foil adapts to the adhesive volume. During transport, the adhesive volume can change upon temperature fluctuations. Adhesive cartridge DELO FLEXCAP When heated up, the piston is pressed upwards. When the adhesive cools down again, air gets trapped. The flexible foil adapts to the adhesive volume. No more air gets trapped. Pressurization during dispensing When pressurized, the conventional cartridge slightly expands. Consequently, air penetrates...

The innovative DELO FLEXCAP foil cartridge The pressure tank with integrated fill level sensor DELO FLEXCAP Properties Flexible membrane instead of piston Cost savings due to complete emptying Piston-free design eliminates friction, allowing for high dispensing accuracy Airtight during storage, transport and use, enabling easy and cost-efficient dry ice transport Bubble-free adhesive Reproducible dispensing results Reliable adhesive dispensing High production reliability and reproducible quality Cost savings thanks to reduced component waste (high yield) The DELO FLEXCAP foil cartridge is a fully...

Pressure tank with fill level sensor The pressure tank of DELO FLEXCAP is equipped with a fill level sensor, providing benefits mainly in fully automated production. Integrated sensors transmit a signal that indicates when the cartridge is nearly empty and completely empty. As a result, the user can prepare a new cartridge in time to achieve maximum productivity. Safety-relevant applications benefit enormously from the increased reliability of dispensing ■ RFID ■ Casting of electronic components, such as sensors ■ Bonding of mini-cameras (CCM) ■ and many more

Bubble-free dispensing... Dimensions in mm 33 DELO FLEXCAP 10 ml with pressure tank DELO FLEXCAP 30 ml with pressure tank

-The DELO-DOT PN jet valve with DELO FLEXCAP 30 ml in pressure tank with fill level sensor Désignation Article number DELO-XPRESS 923 NK, pressure tank with fill level sensor for DELO FLEXCAP 30 ml 91 100 13 DELO-XPRESS 923, pressure tank without fill level sensor for DELO FLEXCAP 30 ml 91 100 12 DELO-XPRESS 921 NK, pressure tank with fill level sensor for DELO FLEXCAP 10 ml 91 100 24 DELO-XPRESS 921, pressure tank without fill level sensor for DELO FLEXCAP 10 ml 91 100 16 Case study: Lens barrel to holder bonding To achieve perfect image quality, the lenses and image sensors of cameras must...

Headquarters Industrial Adhesives Headquarters Industrial Adhesives  Germany · Windach / Munich Phone +49 8193 9900-0 [email protected] www.DELO.de  China · Shanghai Phone +86 21 2898 6569 [email protected] www.DELO-adhesives.com/cn Germany · Windach  Japan · Yokohama / Munich +49 8193 9900-0 Phone +81 80 1579 2794 [email protected] [email protected] www.DELO.de www.DELO-adhesives.com/en USA · Sudbury, MA  Malaysia · Kuala Lumpur +1 978 254 5275 Phone +65 6807 0800 [email protected] [email protected] www.DELO-adhesives.com/us www.DELO-adhesives.com/en  Singapore Phone...