STANLEY Alpha V "QBE" Controller and E tools
24Pages

1ST FRENSH MARKETER OF INDUSTRIAL MATERIALS AND PRODUCTS Stop estimating your torque, Measure it!! Facing productivity, quality, security, and ergonomic requirements which are more and more restrictive, industries turned to closed-loop tightening. If this is your case, our closed-loop electric solution is the answer to your needs. The TORQUE SENSOR… A quality garantee Our tools integrate a sensor which enables the measurement of the torque in a dynamic way and reports the real torque applied at the end of tightening (at the complete end of the rotation). The values shown by systems which...

• Stop estimating your torque, Measure it !! • ALPHA.V STANDARD controller • ALPHA.V ADVANCED controller • ALPHA.V EXPERT & NODE • Technical feature • Bit socket tray and accessories • E “retractable axial spindle MB_F” screwdriver • E” Retractable offset spindle MD_F” screwdriver • Cable selection • Specific screwdriver

Available on all the range of the QBE controllers, the « Auto-adaptable tightening control » is a speed modifying functionality patented by STANLEY. At each tightening cycle using the same program, the controller adapts the braking of the tool in a dynamic and automatic way regarding the evolution of the torque between the start and the end of “ATC” When ATC is activated, approaching and braking speed are adapted regarding the assembly characteristics or mechanic variation which might exist between different parts of a same piece or different piece of a same lot. After ATC • Helps and...

Alpha toolbox software All the Alpha. V controllers from the QBE range are equipped with « Alpha toolbox » software and have an Ethernet port only dedicated for a local use. A website such as “http://atb.qpm allows a quick and simple communication with a computer. Display and analyze of one or more curves Visualization of the last tightening and results saving for analysis Ability to download and save programmed parameters Doc.60296.05/17

Alpha.V standard controller The standard Alpha.V QBE (QB2101) is a controller compatible with the entire range of “Torque and Angle” screwdrivers of type E,EA and EC. The controller is the response to tightening strategies, traceability and communication issues. Strategies - Torque + angle monitoring (TC/AM) - Angle + torque monitoring (AC/TM) 16 jobs, 16 tasks - selectable by I/O, serial port or by keyboard Up to 8 steps per job - Unlocking - Slow seek - Self-tapping - Pre-torque - Bit socket unlock - Untightening Access to the settings by keyboard or by Alpha toolbox software Results...

Communication and connexion Ethernet port -RJ45 local Only dedicated to program the controller with a computer with a web page USB port - Download data memorized on memory stick - Save, restore controller’s parameter - Software upgrade - Saving and restoration of the controller’s parameter - Curve and results analyze Tool connector 8 Inputs/ 8 outputs 24V - Affectable - Configurable - Job selecting by bit socket tray or PLC - Exchange with HMI Factory network Serial port – RS232 - Data collection in direct flow OR - Job selection by bar code scanner and/or sticker printer Example of default...

Alpha.V advanced controller Alpha.V QBE advanced controller (QB3101) is a controller compatible with the entire range of “Torque and Angle” screwdrivers of type E,EA and EC. The controller is the response to tightening strategies, traceability and communication issues. It’s software and connectors are also equipped to control a second controller Node with “Master and Slave” mode. Strategies - Torque and angle monitoring (TC/AM) - Angle and torque monitoring (AC/TM) - Torque and angle (TC/AM) - Prevailing torque - Slope control - Tightening at yield - Untightening - 255 jobs selectable by...

Communication and connexion Ethernet port -RJ45 local Only dedicated to program the controller with a computer with a web page USB port - Download data memorized on memory stick - Save, restore controller’s parameter - Bar code ASCII if no use of intern PLC - Software upgrade - Saving and restoration of the controller’s parameter - Curve and results analyze Internet port (2) - plan network on port 1 AND/OR - unable connection between 2 alpha.V QB (ADV+NODE) for 2 tool application 8 Inputs/ 8 outputs 24V - Affectable - Configurable - Job selecting by bit socket tray or PLC - Exchange with...

ALPHA.V - EXPERT & NODE The Alph.V QBE expert (QB4101) has the same functionality and features as the Alpha.V QBE advanced and enable the control of up to 24 tools with “23 slave tools “ via a advanced or nod controller network connected in serial mode via their Ethernet port. From 3 tools this combination of “Master, slave” controller is the ideal response to multi-spindle or synchronized or not multi-driver application ALPHA.V QBE Node (QB0101) - Without screen or keyboard - Programmable true The Master expert controller or via « AlphaToolbox » on compuALPHA.V QBE Node (QB4101) - Large...

Technical feature Optional network port The controller is delivered with : Dim (mm): l. 152 x h.406 x D.264 Weight: 8,2 kg Working conditions: - Temperature: 0 to +50° - Humidity: 0 to 95% Power supply: 220 – 240 VAC, 50/60 Hz, 10-16A Consumption : - 0,2A in stand by - 1 to 2,5 KVA in use (tightening) IP 54 - 230V Power supply wire: L: 2m (ref: 20C102102) - Wall mounting plate (ref:20E204300) - 16 pin connector for I/O AON 24VDC (ref:20C104806) Code : 4-1500126 Wall mounting plate. Enable an easy mounting/dismounting.

Mounting bracket Mounting flange Mounting interface torque reaction arm axial screwdriver Code 4-1500715 4-1500718 4-1500721 Designation Mounting interface with toc for E12 Mounting interface with toc for E23 Mounting interface with toc for E33 Standard bit-socket tray Designation Bit-socket tray with connector E/S 24V Bit-socket tray with connector E/S 24V Bit-socket tray with connector and repeater* E/S 24V Bit-socket tray with connector and repeater* E/S 24V Bit-socket tray with connector DeviceNet / Alpha.IV-MDV Bit-socket tray with connector DeviceNet / Alpha.IV-MDV * The I/O repeater...