2D optical measurement devices • Précise 2D measurements in a matter of seconds • High-resolution finish • Simple and intuitive • Manual or CNC SIMPLY PRECISE

V-CAD series Compact 2D optical measurement devices for measurement objects up to 500 mm Intuitive measurements made easy Measurements do not get much quicker or simpler than this: Choose the single-image field system, or the larger variant with moving table and measuring volume of up to 500 x 200 mm, for a whole host of options when it comes to your 2D measurements. Manual operation is a possibility, however also fully-automatic CNC operation. Personal touches can also be added in other areas. Depending on requirements, you can choose be- tween the high-performance SAPHIR 7 (combination of the...

Standard equipment V-CAD 60 and V-CAD 80 • -megapixel CCD B/W camera 5 • Telecentric 4-stage motor zoom • 4 different image fields for precise measurements • Telecentric LED transmitted light illumination • LED incident light illumination • Multi-touch panel PC • LAN and WLAN network connection • V-CAD 60: SAPHIR or M3 measurement software • V-CAD 80: SAPHIR measurement software • Calibration certificate Highlights of the V-CAD 60, V-CAD 80 and V-CAD 300 • utomatic recognition of control A geometries without pre-selection • omplete capture of 2D geometries C in one image field • No alignment...

V-CAD 300 Do you have large workpieces? From a device size of 300 x 200 to 500 x 200, the V-CAD series includes a moveable measurement table, with which you can measure your workpiece manually and via the CNC control system achieving the usual level of precision. Devices of this size have a large measurement range by combining the advantages of a large image field with the functions of a measurement microscope. Standard equipment of the V-CAD 300 / 400 / 500 • easurement range X = 300/400/500 mm, Y = 200 mm M • Telecentric 4-stage motor zoom • different image fields for precise measurements 4...

Special solutions The perfect solution for every task! Should the scope of the standard V-CAD series machinery prove insufficient, it can be tailored to suit your individual measurement or specific situation at any time. The V-CAD can also be upgraded to a fully-automatic measuring cell for incoming or final inspections. Individual workpiece feeding and discharging can be integrated here to connect one or several measurement stations. Handling can include everything up to customised sorting and packaging. You can trust us with your project. Together, we will find the perfect configuration for...

The new SAPHIR 7 measurement and analysis software represents Measurement Technology 4.0 in all its forms. The workpiece itself is a channel of information and even workpieces for which there is no program yet are also identified within their contour. The measurement program is created by setting the arrow heads at the relevant points of the resulting DXF file. Subject to technical changes - 03.2019/LM&W/ODD 1) Admissible ambient conditions 20°C ± 1 K, Température gradient Ath = 0.5 K/h, Atd = 4.0 K/d, measured with a calibrated standard 2) Relates to standard monitor and default settings Dr....