Catalogues >
halstrup-walcher GmbH >
Data sheet PSE 3210/3218-14 (Torque 10/18 Nm)

Data sheet PSE 3210/3218-14 (Torque 10/18 Nm)
3Pages

Extraits du catalogue

Data sheet PSE 3210/3218-14 (Torque 10/18 Nm) - 1

Nominal torque Self-holding torque Nominal rated speed hollow shaft ø14H7 / 20 depth with clamp and feather key DIN 6885-A5 x 5 x 12 Nominal current Positioning range absolute measurement of position taken directly at the output shaft 6 not subject to mechanical limits Shock resistance Vibration resistance Output shaft 14 mm hollow shaft with clamp and feather key Snap-on brake optional (holding torque = nominal torque) Maximum axial force Maximum radial force Storage temperature Protection class CE, optional: NRTL, opt: STO with / without test pulses 1) S TO: only for IP 65, only for EtherCAT, PROFINET, EtherNet / IP , without galvanic isolation of the power supply voltage in accordance with IEC / DIN EN 60068-2-6 in accordance with IEC / DIN EN 60068-2-27 removeable sight glass for LED status / address switches Ambient temperature torque support sealing plate, 2 mm thick The order key and accessories can be found on p. 18 / 19. Dimensions in mm. For details of the connections please see also p. 55 and the instruction manual. Data sheet PSE 3210 / 3218-14 – Date: 08/ 2021 – Subject to technical changes without notice Positioning accuracy Power consumption (control unit) 24 V DC ± 10 % galvanically separated between control and motor and bus Supply voltage over a rotating manual adjustment shaft SW 6 / 8 depth hex Duty cycle

Ouvrir le catalogue en page 1

Data sheet PSE 3210/3218-14 (Torque 10/18 Nm) - 2

ORDER KEY PSE / PSS / PSW 3 SERIES A CA: CANopen Positioning System Efficient (see p.22 - 28) Positioning System Stainless (see p.29 - 33) Positioning System Washable (see p.34 - 38) not for PSE 31x always via an extra connector plug, not for IO-Link or PSW 5) not for PSE 34xx 3) 4) 0: CE N: NRTL + CE S: STO + CE without test pulses 7) 0: without M: with 6) Z: Plug-in, Y-coded, with jog keys 3) 5) T: TO + CE with S test pulses 7) Y: TO + NRTL S without test pulses 7) Z: TO + NRTL S with test pulses 7) 6) only 14 mm output shafts only for IP 65, not for PSE 34xx, only for EtherCAT,...

Ouvrir le catalogue en page 2

Data sheet PSE 3210/3218-14 (Torque 10/18 Nm) - 3

ACCESSORIES PSE / PSS / PSW 3 SERIES The connectors shown here can be used for all 3 types of device (PSE / PSS / PSW). This ensures that the PSE (IP 54) and PSS (IP 65) comply with the IP protection classes. We will also be pleased to help you find a suitable mating connector for the PSW (IP 68) if necessary – just ask us! Power supply + databus connector (2x) (for option 0) 1) Power supply + databus (2x) + jog key connector (for option T, not for PSW) 1) 2) Cable and connectors for 1-connector solution 3) (for option Y or IO-Link) 1) CANopen 4) PROFIBUS DP Modbus RTU 5 m: Order no....

Ouvrir le catalogue en page 3