Catalogues >
Labthink Instruments Co., Ltd. >
Testeur de traction automatique PARAM® MEGA 1500

Testeur de traction automatique PARAM® MEGA 1500
3Pages

Extraits du catalogue

Testeur de traction automatique PARAM® MEGA 1500 - 1

PARAM® MEGA 1500 Auto Tensile Tester MEGA 1500 Auto Tensile Tester is professionally designed for the determination of tensile strength, peel strength, tear strength, heat seal strength and adhesiveness of plastic films, composite films, flexible packaging materials, adhesives, adhesive tapes, pressure sensitive tapes, medical patches, protective films, release paper, rubber and paper, etc. Professional Technology • Double-column ball screw driving mechanism ensures high precision and steady working of the instrument • Multiple testing modes are available including tensile strength, deformation, peeling and tearing, etc. which can meet the testing demands of the customers • Stress at defined elongation, elastic modulus and stress and strain etc. can be analyzed • 1200mm extra-long stroke satisfies the test needs of various materials with extreme deformation rate • 6 working stations and pneumatic specimen clamping facilitate to test multiple specimens simultaneously • Load cells with different test ranges and stepless speed change from 1 to 500mm/min can meet the requirements for various testing conditions • The embedded computer controller system, with membrane switch is convenient for instrument operation • Multi-level over-travel protection, overload protect, automatic position reset and intelligent error alerts for safe test operation • Embedded computer controlled system effectively guarantees the system security and the reliability of data management as well as test operation • The instrument can be operated with one monitor, one mouse and one keyboard, not requiring a computer • The system is equipped with four USB ports and two net connection interfaces, which is convenient to data expansion • Professional operating software supports superposition analysis of test curves of group specimens and statistical analysis of maximum, minimum, average and standard deviation of test results Test Principle The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The changes of force and displacement are separately recorded by the load cell fixed on the moveable sample grips and embedded displacement transducer. The tensile strength, tear strength and elongation rate can be obtained by further calculation. Test Standard This test instrument conforms to the following standards: Labthink Instruments CO-, Ltd. 144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86-531-85068566 FAX: +86-531-85062108 Labthink International, Inc. 200 River's Edge Drive, Medford, MA, 02155, U.S.A. Phone:+1-617-830-2190 FAX: +1-781-219-3638 www.labthink.cam

Ouvrir le catalogue en page 1

Testeur de traction automatique PARAM® MEGA 1500 - 2

ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, GB 8808, GB/T 1040.12006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 17590, JIS P8113, QB/T 2358, QB/T 1130 Applications This instrument is equipped with more than 100 grips for tests of more than 1000 materials. And customization is also available for special material tests. Examples of instrument applications: Spécifications Load Cell Capacity Accuracy Test Speed Number of...

Ouvrir le catalogue en page 2

Testeur de traction automatique PARAM® MEGA 1500 - 3

Clamping Way Stroke Gas Supply Pressure Port Size Instrument Dimension Power Supply Net Weight Pneumatic Specimen Clamp 1200mm 0.6MPa~0.7MPa (Outside of Supply Scope) 06mm PU Tubing 850 mm (L) x 700 mm (W) x 2030 mm (H) 220VAC 50Hz / 120VAC 60Hz 168 kg Instrument, Professional Software, Pedal Switch, LCD Monitor, Keyboard, Standard Configurations Mouse, Pneumatic Clamping System, Wireless Data Interface, Wireless Data Module, Micro-printer, Standard Sample Grip (25mm) Optional Parts Sample Cutter SetNote, High Gain Antenna, Installing Support Note: Clamp the whole sample into the sample...

Ouvrir le catalogue en page 3