PRODUCT BRIEF D-Lightsys® 10+ Gbps multi-channel transceivers - Several configurations in a single package o Four channel transceiver (4Tx + 4Rx) o Twelve channel emitters (12 Tx) o Twelve channel receivers (12 Rx) 1 to 10 or 12 Gbps per channel @ 850 nm (depending on package) Extra small pigtailed package Pluggable or solderable electrical interface Low power consumption Internal temperature compensation for qualified operational temperature range of [-40; +90 °C] Performance monitoring and control functions

PRODUCT BRIEF D-Lightsys® 10+ Gbps multi-channel transceivers Product Description - D-Lightsys® multi-channel 10+G range provides integrated devices for converting between high speed optical and electrical I/O Optimized for short distance, high data rate optical communication over multimode fiber The devices are compatible with various differential electrical signals such as LVDS, CML and PECL and can stand many digital balanced protocols as 10 Gigabit Ethernet, Fiber Channel, Infiniband, etc. Designed for high reliability and performance in harsh environments, the D-Lightsys® 10+ G...

PRODUCT BRIEF D-Lightsys® 10+ Gbps multi-channel transceivers D-Lightsys® modules can be used in two driving modes, to be selected by the end user: - A stand-alone mode where internal parameters of the modules are pre-set in factory for ease of use. User accesses main control parameters as well as internal monitoring data thanks to the module’s IN/OUT pins control. In that mode, the module implements a temperature compensation mode against external temperature variations thanks to the internal microcontroller. A remote control mode where the internal parameters of the modules are set by the...

PRODUCT BRIEF D-Lightsys® 10+ Gbps multi-channel transceivers Mechanical D-Lightsys® multi-channel modules are available in two packages: a pluggable and a solderable one, both with extra small form factors. The solderable package is especially thin, with an on-board height of less than 4 mm. Solderable 48 pins package Pluggable 100 pins package Optical D-Lightsys® multi-channel module’s optical output is made of a 12-channel ribbon fiber, ending with an MT ferrule. C-MTitan and Q-MTitan contacts can be set on the MT ferrule to fit a wide range of circular and rectangular connectors. N...

PRODUCT BRIEF D-Lightsys® 10+ Gbps multi-channel transceivers Ordering Information Several versions of D-Lightsys® 10 Gbps multi-channel modules are currently available. For other configurations, please contact Sales. Du-xx-1000-w-yz-vv vv : Pigtail Length ↔ 50/125µm ribbon fiber ↔ 50/125µm ribbon with over braid ↔ MPO/MTP connector ↔ MT ferrule only ↔ VITA 66.1 Compatible Spring & Pins ↔ Radiall C-MTitanTM ↔ Radiall Q-MTitanTM GM↔ 100-Pin Meg-Array socketed package L ↔ 48-Pin SMT LCC package Contacts Sales: For Europe: info@radiall.com For USA: infousa@radiall.com For Asia:...